KXK Dynamics XP Punch Kit V2

$219.99 $249.99

This product is unavailable
Description
This is a stout piece of hardware - intended for experienced detailers. Intended to be use with the KXK Dynamics/Oberk KO-1 Microfiber Sheet.

KXK Dynamics XP Punch Kit V2 features shorter punches with a brilliantly designed and extremely versatile punch handle!  This over engineered tool is designed to take the brunt force when punching out  1-3/8", 2", and 2-3/4" pads in minutes. The Stryker handle allowed them to save material (providing increased savings to you) by shortening the punch portion of the unit and transferring the function of the handle into a single versatile peice which can be used on all 3 punches. 

The XP-1 is capable of easily punching (15) 1" pads from a 6" in only a couple minutes.  In other words... for every pad you turn into "swiss cheese" to create your 15 new pads you save $50!   The XP-2 punches out (7) 2" pads for an impressive $25 savings per while the XP-3 can easily create (3) pads while still leaving room for (3) 1" pads to use excess.

Machines ideal for small pads

1-3/8" and 2" pads produced by the XP-1 and XP-2 are perfectly sized for your iBrid nano, LD-30, TA-50, and a variety of other machines on the market.

2-3/4" pads produced by the XP-3 will fit any 2 1/2" to 2 3/4" backing plate.  The founders of KXK Dynamics use RUPES line of incredible machines day in and day out.... so for your "RUPES Mini" backing plate they came up with an ingenious solution... Punch it!

Why a 2-3/4" pad vs a 3" pad for the XP-3?

The XP-3 Pad Punch's diameter is slightly smaller than standard 3 inch backing plate diameters, and you may ask why.  And the answer to you is:  a higher pad yield, AKA more pads punched out of a 6" microfiber pad.  But have no fear, it is a very simple backing plate modification that can be accomplished with, you guess it, the XP-3 Pad Punch.  For most 3" backing plates, the XP-3 Pad Punch can be used to "trim" a slight ring off the edge of the plate to match the pads you will punch.

For those of you that do not use 1", 2", or 3" pads very often this kit is not a necessity...  However for those who utilize 1", 2", and 3" pads, the KXK Punch Kit is a no brainer!  

Kit Includes:

  • (1) XP-5 V2 Stryker Handle
  • (1) XP-1 V2 Pad Punch w/ blade cap
  • (1) XP-2 V2 Pad Punch w/ blade cap
  • (1) XP-3 V2 Pad Punch w/ blade cap
  • (1) Punch Board

Specifications

XP-1 Handle Styker:
  • XP-S Stryker Height: 4 1/2"                   
  • XP-S Stryker Diameter: 1 3/4"               
  • XP-S Stryker Weight: 1.05 lbs         
XP-1 Punch:                                           
  • XP-1 Height: 2 1/2"
  • XP-1 Outer Diameter: 1 5/8"
  • XP-1 Weight: 0.70 lbs
  • Produces: 1-3/8" Dia. Pads
XP-2 Punch:
  • XP-2 Height: 2 1/2"
  • XP-2 Outer Diameter: 2 3/8"
  • XP-2 Weight: 1.20 lbs
  • Produces: 2" Dia. Pads

XP-3 Punch:

  • XP-3 Height: 2 1/2"
  • XP-3 Outer Diameter: 3 1/8"
  • XP-3 Weight: 1.55 lbs
  • Produces: 2-3/4" Dia. Pads

XP-0 Punch Board:

  • HPDE Plastic 
  • Length: 10"
  • Width 8"