What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.

What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work

What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint.  Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.

Note – A simple test spot with each combination above should easily determine which is better for your vehicle.