WE'RE OPEN AND SHIPPING!$5 Flat Rate Ground Shipping!For any cart over $75
Oberk Supreme Polish(SP) was formulated to provide a premium option for polishing and finishing on even the softest, dark painted finishes, and brilliant clarity. With the most innovative and premium diminishing abrasives in the world, this polish offers what other polishes lack to provide. The formula provides a perfect balance of consistency or viscosity, ability to work well with microfiber and foam pads, and without the use of heavy solvents, silicones or oils. This polish is required for step 2 in the Oberk Supreme DUO system.
Perfect for use on all types of machines including DA, forced rotation, rotary, and long throw DA machines
Water based formula provides a superior option when used on all types of foam and microfiber pads.
Prime your foam polishing pad with Supreme Polish. Use 4-6 pea-sized drops. Apply 2 pea-sized dots of product on sections after work. Work in 2 x 2' areas and handle product until a fine film develops.
Remove residue with a quality microfiber towel.
What should do if I see haze or micromarring after using the 2 step system. Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work
What do I use for one step polishing? We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint. Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.
Note – A simple test spot with each combination above should easily determine which is better for your vehicle.