The KXK Dynamic Palm Blox were specifically designed for use on NON OEM paint with your choice of sandpaper. Palm blox is are larger than R.I.D. stix, designed for tackling larger areas of sanding.
When used in combination with sand paper, Palm Blox's ergonomic, patent-pending design, maximizes the contact between the sanding block and a vehicle panel to obtain a more consistent, even sanding mark that can be polished out quickly and easily! Palm Blox's design also provides automotive refinishing technicians with enhanced feedback between the block and the panel being sanded.
Features
• Enhanced feedback between sanding block and panel being sanded
• Contours to surface
• Beveled top
• No bevel on bottom
• Customizable
Specifications
• PBH-5 Block: 5.25" x 1.25" Soft Foam Black Block
What should do if I see haze or micromarring after using the 2 step system.
Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work
What do I use for one step polishing?
We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint. Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.
Note – A simple test spot with each combination above should easily determine which is better for your vehicle.