WE'RE OPEN AND SHIPPING!$5 Flat Rate Ground Shipping!For any cart over $75
Oberk 2-Step 8 oz. Complete System
Want to try the complete package, well here is everything you need! This is the ideal kit for 1-2 cars depending on paint correction requirements.
Fueled by testing and developing products, Oberk was developed to reinvent the process of paint correction and produce superior products in the automotive and detailing industry. Years of testing products throughout the world created a need to produce products that simplified a process to polishing any paintwork. Oberk products are formulated for the top tier professional, and enthusiast alike.
The Oberk Duo Package was formulated to take the guesswork out of paint correction.
Why buy this product?
Full line of Oberk Supreme Cut & Polish combo that removes light to severe paint defects. This product is intended for all levels of hardness of automotive paint.
Remove heavy scratches and swirl marks with Supreme Microfiber Cutting Pad & Supreme Cut compound. This is step 1 one of the Oberk Duo System.
Refine compounding marks and restore gloss and shine with Supreme Foam Polishing Pad & Supreme Polish. This is step 2 one of the Oberk Duo System.
Formulated without fillers; the results you see are the results you get
Optical grade micro abrasive technology for enhanced clarity and precision
NOTE: Wash, clean, & decontaminate the car prior to using any car paint correction products. Shake bottles before use. Avoid use on hot surfaces or in direct sunlight.
DUO STEP 1:Correction Stage
Prime Oberk Orange microfiber cutting pad with Supreme Cut. Use 4-6 pea-sized drops. Apply 2 pea-sized dots of product on sections after work. Work in 16 x 16" areas and handle product until a fine film develops. Remove residue with a quality microfiber towel.
Once heavy scratches and swirl marks are removed, move on to Duo Step 2 to remove finer scratches and marks.
DUO STEP 2: Finishing Stage
Prime Oberk Red foam polishing pad with Supreme Polish. Use 4-6 pea-sized drops. Apply 2 pea-sized dots of product on sections after work. Work in 2 x 2' areas and handle product until a fine film develops. Remove residue with a quality microfiber towel.
What should do if I see haze or micromarring after using the 2 step system. Micromarring is common on the initial step. Repolish the area using the same combination to ensure that the polish was cycled and completely broken down, or the surface itself polished long enough. Typically, if you have any issues with the red pad and polish combination finishing, the firmer pad will normally resolve these issues on your specific paint work
What do I use for one step polishing? We recommend our Yellow medium polishing pad paired with either out OBERK cut or OBERK polish depending on paint. Typically, we recommend harder paints – Oberk Cut with Yellow pad. Softer Paints – Oberk Polish with Yellow pad.
Note – A simple test spot with each combination above should easily determine which is better for your vehicle.