Blog
Creator Summit 2023 @ The Bays - Car Supplies Warehouse social media event
FIAT X19 Preservation Detail
We recently had the opportunity to do a preservation detail and polishing service to a 1976 Fiat X19 that has been tastefully modified and well kept for decades. While I don’t know all the exact details of this car, it has many aftermarket parts, cometizione parts as well as some really cool body part and wheels.
This targa came in for protection and preservation. The factory paint is failing but all still original and even. The goal of this service was to lightly polish the paint to remove light scratching, deepen the color, remove some water spots and treat everything with our favorite Swissvax concours wax. When polishing, we really wanted to minimize too much physical liquid on the pad to avoid impregnating and pushing any solvents and debris into the cracks of the paint, rather run a dryer pad and work very cleanly.
A lot of the trim pieces were removed to clean behind them and airbrush with Gtechnic trim coating including engine grilles. Many of the parts went back on with the factory cosmoline still intact. We didn’t want to clean or remove any of that factory coating. While it doesn’t look good, it does protect the surface and takes away from the originality from the car as well.
All of the flat black parts were cleaned with a beta water spot remove that we have been working on, and then followed up with paint prep and ceramic coating to help protect them the best as we can.
The brightwork was all lightly hand polished to give a nice appearance but not overpolihsed, and we cleaned the tires to give them that new look.
A couple notable pieces that make this car are the FAZA snorkel engine cover intake that shoots air into the Webber carbs. The Abarth Steering weheel gives a nice tough and feel on the interior and the ATS wheels give it the perfect look and period correct add on.
The Bertone styling and designe is definitely unique and has had a timeless feel that has become more collectable. We polished inside the engine cover, under the front bumper and did a light detail on the interior to freshen everything up.
We didn’t have enough time to do a video, not to mention the fact that I am not the most knowledgeable about these cars, but I hope you enjoy the pictures and blog write up. The paint work was polished with Sole and a yellow pad for a one step process and beautiful results.
We gace this Fiat the preservation it was looking for. We fully completed a full wash and decontamination with claybar and other iron removing contaminents, perpared and polished the paint to the best ability while trying to get the best paint correction as possible without owver buffing or polishing the original finish to damage it more. The wheels were cleaned using Oberks 2 in 1 wheel cleaner that uses iron removers and chemicals to break down the brake dust. The tires, plastics and rubbers were all cleaner very well and eith cermaic coated or conditioned for years of life.
Thanks for reading!
The products used are what we love and support people and products who support us as well. Some of the links below are paid sponsors, but still represent product we support and enjoy using with great results.
Rupes Ibrid 1' and 2" polisher - https://amzn.to/3JOMhIi
Rupes 3" LHR 75 pneumatic polisher (best 3" polisher out) - https://amzn.to/42SOqLG
Rupes 15mm polisher Mark III - https://amzn.to/3lPUCn0
KXK Dynamics sanding blocks - https://oberkcarcare.com/collections/tools/KXK-Dynamics
KXK Dynamics sandpaper - https://oberkcarcare.com/collections/tools/KXK-Dynamics
Oberk Rinseless Wash - https://oberkcarcare.com/products/rinseless-wash-concentrate
Adaptiv inspection light - https://oberkcarcare.com/products/ada...
Microfiber towels - https://oberkcarcare.com/collections/...
Tire – Rubber- Plastic cleaner - https://oberkcarcare.com/products/tir...
Wash Sponge - https://amzn.to/3G2WDTU
Bucket, dolly, and grit guard setup - https://amzn.to/3ZkEIPi
Grit guard if you already have your own 5 gallon buckets - https://amzn.to/3ZkEIPi
Oberk APS soap - https://oberkcarcare.com/products/aps...
Oberk 2 in 1 wheel cleaner - https://oberkcarcare.com/collections/...
Oberk Cut and other polishes - https://oberkcarcare.com/collections/...
Oberk polishing pads - https://oberkcarcare.com/collections/...
Solution Finihs trim restorer - https://amzn.to/3ziaPoe
Tornador Blow Gun - https://amzn.to/3G1QIOU
Dave Patterson
Oberk Car Care
All Purpose Soap is Here! Plant based power
Oberk APS is our all new All Purpose Soap that we developed to differentiate between soaps on the market. Many soaps we find currently are Ph neutral and offer a means of lubrication to manually wash the vehicle. Other very aggressive soaps can either be alkaline or acidic cleaners that work extremely well, but risk damaging sensitive materials and metals. Oberk All Purpose soap is a Plant Based formula with no odor, that was originally formulated in the semi-truck washing industry. Washing Semi trucks can be challenging because they get very dirty, but also very hard to clean all at once without drying. Our Staywet technology helps keep maximum lubricity while increasing the dwell time . Along with that, the formula is easier to rinse from the surface if partially dried without registration. This is all of coarse if you use 100% filtered water. Additionally, this formula attacks salt build up and salt sprays often used in northern states that get snow and colder weather. Oberk soap is the perfect solution for mobile detailers but also works fantastic as a prep soap prior to the paint correction process, or as a maintenance soap for ceramic coated vehicles. This soap with strip most waxes and polymer based sealants. While this isn’t a "foam soap", and doesn’t have a heavy foam, if used as a prewash it pulls, lifts and drags the dirt and debris from the surface to then be pressure washed off. This can actually be used a s a hand free wash is used on a well maintained, ceramic coated vehicle.
This solution works in 3 ways -
1. Traditional washing method - add .5oz per gallon
2. Foam Cannon prewash - 2-4oz per cannon
3. Mix 1:4 in spray bottle for bug remover (foaming sprayer or IK foamer suggested
To find out more, click any pictures,
On Sale now at www.oberkcarcare.com